改进柔性资源约束项目调度模型与粒子群算法

在资源受限项目调度问题中,将可再生资源进一步拓展为具有能力差异的柔性资源,建立考虑能力差异的柔性资源受限的多模式项目调度问题模型,该模型是对传统资源约束项目调度问题(RCPSP)更接近实际的拓展。提出了基于粒子群算法的求解算法,粒子群算法求解该模型的思路为,利用蒙特卡洛方法根据资源-能力矩阵与活动模式-能力矩阵得到活动模式-资源矩阵,将考虑能力差异的柔性资源受限的多模式项目调度问题转换为常规的多模式项目调度问题,然后利用基于任务序列与模式表示的粒子群算法对该多模式项目调度问题进行求解。用数值实例说明了模型的合理性与算法的有效性。     

基于PGP的动态连接库构成的安全认证系统

探讨PGP系统的主要功能以及实际使用过程中存在的问题,提出了一种新方案,即利用PGP提供的动态连接库以及优盘的特点的解决方案.根据该方案讨论的相关算法和流程,研制出电子文档的加密与认证系统.     

Capacity investment decisions under risk aversion

This article studies the optimal capacity investment problem for a risk‐averse decision maker. The capacity can be either purchased or salvaged, whereas both involve a fixed cost and a proportional cost/revenue. We incorporate risk preference and use a consumption model to capture the decision maker's risk sensitivity in a multiperiod capacity investment model. We show that, in each period, capacity and consumption decisions can be separately determined. In addition, we characterize the structure of the optimal capacity strategy. When the parameters are stationary, we present certain conditions under which the optimal capacity strategy could be easily characterized by a static two‐sided (s, S) policy, whereby, the capacity is determined only at the beginning of period one, and held constant during the entire planning horizon. It is purchased up to B when the initial capacity is below b, salvaged down to Σ when it is above σ, and remains constant otherwise. Numerical tests are presented to investigate the impact of demand volatility on the optimal capacity strategy. © 2016 Wiley Periodicals, Inc. Naval Research Logistics 63: 218–235, 2016     

一种直线段匹配的新方法

直线特征在人造目标和环境中普遍存在,直线段的匹配是三维重建等应用领域的首要解决问题.一般单直线的匹配方法难以解决被部分遮挡直线的匹配问题,提出了一种基于极线约束和RANSAC算法的匹配方法.对直线段上的点运用基于极线约束的匹配方法在另一幅图像中进行点的同名匹配,采用RANSAC算法建立直线模型,剔除野值,得到匹配直线段.本方法能有效地解决图像中被部分遮挡直线段的匹配问题,仿真实验和实际图像实验证实了本算法的正确性和高精度.     

基于复合左右手传输线90°移相器的设计

复合左右手传输线的提出在无线通讯领域将有很大的应用前景,也为微波传输线和微波元件的设计提供了一种新思路.根据复合左右手传输线的相位特性及频带展宽原理设计了一个90°移相器,该移相器理论上可以实现L波段从f_1到f_2的90°移相.相对带宽为31%,工作频带内的绝对误差在±3°以内.仿真结果表明,基于复合左右手传输线的90°移相器能够实现宽带内的移相,且效果比较明显.实际电路也比较吻合仿真电路,达到理想的要求.     

高陡度非球面磨削亚表面损伤深度规律

具有高陡度非球面特性的光学元件可以明显改善光学系统的空气动力学性能,从而提升和优化系统综合性能。磨削加工方法可以作为此类元件的前期加工工序,而磨削难免会造成零件的亚表面损伤,且在这种高陡度非球面磨削加工中磨削参数是实时变化的,造成整个工件亚表面损伤深度不一致。针对这种情况,建立亚表面损伤预测模型,并结合半球形砂轮磨削的特点,通过理论计算预测非球面磨削亚表面损伤深度分布规律。在此基础上,以热压多晶氟化镁平面为对象进行模拟参数实验,通过磁流变抛斑点法得到各组参数下亚表面损伤深度情况,结果显示损伤深度范围在12.79μm~20.96μm之间,且沿试件半径方向由内向外呈增大趋势,结果与预测模型相吻合。     

The Production and Deposition of the Guisborough Helmet

In September 1878 the British Museum received a donation of a folded metal plate which had been embossed and gilded. Restoration of the object revealed that the folded plate was in fact the outer casing of a Roman copper alloy cavalry sports type helmet which dates to the late second or third century AD. The story of what became known as the Guisborough helmet began 14 years earlier in what was then the North Riding of Yorkshire when workers employed by the Cleveland Railway Company discovered a ‘very curious plate of metal’ during road construction. It appears that the helmet was deliberately prepared for deposition and buried at a depth of c30 cm close to a stream. Examination by the authors suggests that this was a high value item that had been repaired many times. Experimental evidence suggests that the decoration alone required approximately 16 h to fashion.     

COSMIC 掩星反演的水汽廓线质量分析

利用2006—2012年北半球冬季低纬度地区(30°S~30°N)无线电探空站数据及全球大气成分和气候监测再分析数据对1000 h Pa~200 h Pa高度层的气象、电离层与气候星座观测系统全球定位系统掩星反演的比湿廓线进行了精度和可靠性验证。结果表明,水汽对气象、电离层与气候星座观测系统掩星反演影响较大,尤其在中、低对流层及热带地区等水汽含量比较大的地区,且气象、电离层与气候星座观测系统掩星数据在850 hpa以下可能并不太适用于评估其他数据。     

From Nationalism to Factionalism: Faultlines in the Naga Insurgency

Do ceasefires or peace talks create fragmentation in the insurgent groups? Rather than proposing claims that can offer predictions about armed groups behaviour under ceasefires or peace processes, the analysts tend to focus largely on the dynamics between state and non-state actor. The experts pay little attention to overtime changes in social and local political context which might contribute to propelling a rebel group towards fragmentation and factionalism. The present study intends to fill this gap by exploring the shifting role of public opinion and ethnic support for the peace talks to ascertain whether it can increase the likelihood of factionalism in rebel groups or not. This article applies this approach to the case of Naga National Movement (1947–2015) in India, and finds that the proposed variable appears to have increased the frequency of factionalism in the movement.     

A quasi-isentropic model of a cylinder driven by aluminized explosives based on characteristic line analysis

A quasi-isentropic study on the process of driving a cylinder with aluminized explosives was carried out to examine the influence of the aluminum (Al) reaction rate on cylinder expansion and the physical parameters of the detonation products. Based on the proposed quasi-isentropic hypothesis and relevant isentropic theories, the characteristic lines of aluminized explosives driving a cylinder were analyzed, and a quasi-isentropic model was established. This model includes the variation of the cylinder wall velocity and the physical parameters of the detonation products with the Al reaction degree. Using previously reported experimental results, the quasi-isentropic model was verified to be applicative and accurate. This model was used to calculate the physical parameters for cylinder experiments with aluminized cyclotrimethylenetrinitramine explosives with 15.0 % and 30.0 % Al content. The results show that this quasi-isentropic model can be used not only to calculate the cylinder expansion rule or Al reaction degree, but also to calculate the physical parameters of the detonation products in the process of cylinder expansion. For explosives with 15.0 % and 30.0 % Al, 24.3 % and 18.5 % of the Al was found to have reacted at 33.9 μs and 34.0 μs, respectively. The difference in Al content results in different reaction intensity, occurrence time, and duration of two forms of reaction (diffusion and kinetic) between the Al powder and the detonation products; the post-detonation burning reaction between the Al powder and the detonation products prolongs the positive pressure action time, resulting in a continuous rise in temperature after detonation.